Inventronics IT DALI 100/220-240/2A1 LT2 L

Product family features

• Line frequency: 0 Hz | 50 Hz | 60 Hz
• With Touch DIM and Corridor Function
• Supply voltage: 220…240 V
• Available with output current range: up to 2,100 mA
• SELV driver
• Constant Lumen Output (CLO)
• Versatile scope of application due to output power range of up to 100 W
• IP rating: IP20

Product family benefits

• DALI-2 certified
• Fully programmable via software (DALI Interface)
• Flexible current setting (RSet)
• Lifetime: up to 100,000 h (temperature at T_c = 65 °C, max. 10 % failure rate)
• High-quality dimming of 3…100 % by amplitude dimming
• Wide operating range
• High quality of light thanks to <3% output ripple current
• High efficiency
• Fulfill safety requirement due to overload, overtemperature, Hot Plug protection
• Non-isolated driver
• Small, slim white metal housing (W )30 x (H)21 mm

Areas of application

• Linear and area lighting
• Linear lighting for office, education, industry, storage areas and retail
• Installation in emergency lighting systems according to IEC 61347-2-13, appendix J, except those used in high-risk task areas, i.e. those systems must not be used in workplaces where operators and other occupants of the premises are involved in potentially dangerous processes or situations.
• Suitable for luminaires of protection class I
• Suitable for emergency light installations

WarningFor Australia and New ZealandWARNING: FELV terminals marked “Risk of electric shock” are not safe to touch.WARNING: Circuits connected to any FELV control terminal shall be insulated for the LV supply voltage of the control gear and any terminals connected to the FELV circuit shall be protected against accidental contact.

Ecodesign regulation information:Intended for use with LED modules.The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.

Output power	20…100 W
Output current	1000…2100 mA
Isolation	SELV
Protection (IP)	IP20
Programming interface	DALI - 2
Emergency lighting	Yes
Dimensions	360 × 30 × 21 mm (l x w x h)
Certificates	CE, ENEC, CCC, BIS, RCM, DALI-2, EL