Genius 8CH
EAN AM38214003I
A relay controller and energy meter combining load switching, energy monitoring and power measuring in a single device.
- Real-time monitoring of critical installations/objects
- Eight bistable relay outputs SPST, up to 20 A resistive load @ 230 V AC
- Measured data: voltage, current, power (active, apparent, reactive), power factor, energy, phase, line frequency, status
- Connectivity via Modbus RTU / ASCII
- Flexible mounting on 35 mm DIN rails or surfaces
The Genius 8CH combines measuring and switching load in a single device. Communication with any third-party system runs via the Modbus RTU/ASCII protocol over an RS-485 interface. It provides eight bistable relay interfaces in single-pole/single-throw configuration, plus manual switches for service overrides — a modular basic solution for controlling lighting installations. Mounts on standard 35 mm DIN rails or via a key hole in the housing base; AC line powered.
| Dimensions (W x H x D) | 213 x 90.5 x 62 mm (excl. fastening clip) |
| Weight | 600 g |
| Power input | 200-240V ±10% 50/60Hz AC |
| Power consumption | < 4 W |
| Operating temperature | -20 … 50 °C (above 40 °C, use max. 4 channels up to 20 A load) |
| Storage temperature | -10 … 70 °C |
| Installation conditions | IP20, indoor only, intra-building connections only |
| Certificates | CE, UKCA, RoHS |
| Relay outputs | 8 x SPST feed-through latching relay with manual override, wire gauge 0.05…5.26 mm², nominal voltage 115…230 V AC per channel |
| Measured data | Voltage, current, power (active, apparent, reactive), power factor, energy (active), phase, line frequency, status |
| Measurement tolerance | ± 3 % |
| Serial port | Modbus RTU / ASCII (RS-485), 3-pin pluggable connector |
| USB port | 1 x Mini-USB, Type B |
Downloads
EN_ecue_Genius_8CH_Spec_v3p0.pdf · Datasheet · 415.6kB
⭳ download
EN_ecue_Genius_Node_combined_Setup_v1p1.pdf · Manual · 3.99MB
⭳ download