DMX2DALI+
EAN CL23100068435
A converter from DMX signal to DALI, controlling up to 512 DALI ballasts.
- 8 DALI broadcast outputs controlled by 8 DMX512 channels
- Up to 64 DALI ballasts per output (512 ballasts total)
- Single 100 to 240 V AC supply voltage
- Power and DMX status LEDs
- Manual and auto DMX addressing modes
- DIP switch for configuration and manual addressing (offset)
- Configurable DALI output on DMX signal loss
- DIN rail mounting
The DMX2DALI+ is a flexible converter from DMX signal to DALI, offering a simple way to control electrical DALI ballasts and dimmers from a DMX controller. Eight addressable consecutive DMX channels control eight DALI outputs, each supporting up to 64 DALI ballasts or dimmers in broadcast mode — up to 512 in total per unit, typically used for controlling fluorescent lighting. Auto and manual DMX addressing modes make installation straightforward.
| Dimensions (W x H x D) | 88 x 90 x 63 mm |
| Weight | 180 g |
| Power supply input | 100 … 240 V AC, 2-pin terminal plug |
| Operating Temperature | -20 … 50 °C |
| Storage Temperature | -20 … 50 °C |
| Ingress protection | IP20 |
| Electrical protection | Protection class II (protective insulation) |
| Housing | Plastic |
| Mounting | 35 mm DIN rail (EN 60715) |
| Certificates | CE, UKCA |
| Input interfaces | 1 x DMX512, 3-pin terminal plug |
| Output interfaces | 8 x DALI, 2-pin terminal plug, 64 ballasts each, max. 15 V / 128 mA; 1 x DMX512 through-output, 3-pin terminal plug |
| User interfaces | 2 x LED for device status/power, 8 x DIP switch for offset/mode configuration |
Downloads
EN_DMX2DALI-_Spec_v1p0.pdf · Datasheet · 405.94kB
⭳ download
EN_DMX2DALI-_Setup_v1p0.pdf · Manual · 2.02MB
⭳ download